Nintendo Switch Payload Injector

Boot into custom firmware without a PC

cfwaifu-rcm-loader-1.png

Boot into custom firmware without a PC

  • Free Worldwide Express Shipping
  • Tracking
  • 24 Hours Dispatch
  • Support for Atmosphere, ReiNX, SX OS & hekate
  • Inject additional custom homebrew payloads
  • Payload Selector button with LED indicator
  • Compatible with emuMMC / Stock Dual Boot
  • Built-in recharchable lithium-ion battery
  • Add or update payloads easily via USB (included)
  • RCM Jig included
  • Free Worldwide Express Shipping
  • Tracking
  • 24 Hours Dispatch
cfwaifu-rcm-loader-1.png

Unlock Homebrew Capabilities

Specifications

Windows

Windows 7 or above

macOS

Leopard (10.5) or above

Linux

Ubuntu, Debian, Manjaro, Mint and more

Android

Ice Cream Sandwich (4.0) or above (via OTG cable)

Compatibility

  • Requires non-patched Nintendo Switch
  • Visit ismyswitchpatched to see if your Switch is compatible
  • Add payload files with Windows, macOS, Linux or Android

Inputs and Outputs

  • Type-C Port (to Switch)
  • MicroUSB Port (for adding / updating payloads)
  • Payload Selector Button
  • LED Indicator
  • RESET Button

Battery

  • Built-in recharchable Lithium-ion battery
  • Up to 1000 payload injects per charge cycle
  • Up to 3 months of standby time

Included

  • Payload Injector
  • RCM Jig
  • MicroUSB Cable

Dimensions

Instructions

Requires custom firmware files on Switch SD card.

Press the Payload Selector [+] button once to check the current payload (LED Indicator)

Hold the Payload Selector [+] button to change the selected payload (LED Indicator)

Enter RCM (Recovery Mode) on your Nintendo Switch

  1. Power off your Nintendo Switch (NOT Standby or Sleep)
  2. Insert your RCM Jig into the Right Joycon slot, sliding it all the way down
  3. Hold down the [Vol+] button and press the [Power] button, the Switch will now enter Recovery Mode (RCM) but the screen will stay offswitch rcm mode jig volume power button
  4. On the Payload Injector, press the Payload Selector [+] button to check which payload is selected (the LED indicator will illuminate)
  5. Insert the Payload Injector into the Nintendo Switch USB-C port
  6. The payload will automatically be pushed to your Switch and it will boot to your custom firmwareswitch atmosphere splash

Support: Updating and Adding Payloads

Press the Payload Selector [+] button once to check the current payload (LED Indicator)

Hold the Payload Selector [+] button to change the selected payload (LED Indicator)

Default Injector Payload Files:

LED 
Color
FolderPayload
 BlueATMOSPHEREAtmosphere
 GreenREINXReiNX
 RedSXOSSX OS
 YellowUSER1hekate
 MagentaUSER2
 CyanUSER3
 WhiteCharging

To add or update custom firmware / homebrew payloads:

  1. Connect the Payload Injector to your PC via MicroUSB, it will be recognised as a USB Storage Device
  2. Copy your payload file to the corresponding folder, see table above
  3. All payload files must be renamed to payload.bin

Compatible with emuNAND and Sysnand / Stock dual boot for online play. EmuNAND + Stock OS Setup Guide 

Support: Format / Reset Payload Injector

Default Payload Injector Files

  1. Plug the Payload Injector into your PC via MicroUSB
  2. Format the Payload Injector as a FAT32 USB Drive
  3. Extract the folders from the default_payloads.zip to the root of the Payload Injector USB Drive
  4. Safely remove the Payload Injector once complete

Support: Payloader Injector Firmware

Payload Injectors from payloadinjector.shop are updated to the latest firmware (1.2) that provides the following changes:

  • Disables the payload selector button when battery is low to prevent data corruption caused by insufficient power
  • LED Indicator will now change to display battery state
  • LED Indicator will now flash during read / write operations (USB to PC transfers)

All future firmware files will be found here

  1. Download and extract the firmware files
  2. Connect the Payload Injector to your PC via MicroUSB, it will be recognised as a USB Storage Device
  3. Copy the IAP folder to the root of the Payload Injector USB Storage Device on your PC
  4. Safely disconnect the Payload Injector from your PC
  5. Reconnect the Payload Injector to your PC and the firmware will be automatically updated (takes around 3 seconds)
  6. The IAP folder will be automatically deleted and the Payload Injector can be disconnected.

Gallery

  • Free Worldwide Express Shipping
  • Tracking
  • 24 Hours Dispatch